Browse Prior Art Database

Definitions of managed objects for the DS3 Interface type (RFC1233)

IP.com Disclosure Number: IPCOM000002048D
Original Publication Date: 1991-May-01
Included in the Prior Art Database: 2000-Sep-12
Document File: 30 page(s) / 45K

Publishing Venue

Internet Society Requests For Comment (RFCs)

Related People

T.A. Cox: AUTHOR [+2]

Abstract

This memo defines an experimental portion of the Management Information Base (MIB) for use with network management protocols in TCP/IP-based internets. In particular, this memo defines MIB objects for representing DS3 physical interfaces. Implementors should consult in addition to this memo the companion document that

This text was extracted from a ASCII Text document.
This is the abbreviated version, containing approximately 7% of the total text.

Network Working Group T. Cox

Request for Comments: 1233 K. Tesink

Bell Communications Research

Editors

May 1991

Definitions of Managed Objects

for the DS3 Interface Type

Status of this Memo

This memo defines objects for managing DS3 Interface objects for use

with the SNMP protocol. This memo is a product of the SNMP and

Transmission MIB Working Group of the Internet Engineering Task Force

(IETF). This RFC specifies an IAB standards track protocol for the

Internet community, and requests discussion and suggestions for

improvements. Please refer to the current edition of the "IAB

Official Protocol Standards" for the standardization state and status

of this protocol. Distribution of this memo is unlimited.

Table of Contents

1. Abstract .............................................. 1

2. The Network Management Framework....................... 2

3. Objects ............................................... 2

3.1 Format of Definitions ................................ 3

4. Overview .............................................. 3

4.1 Binding between Interfaces and CSUs .................. 3

4.2 Objectives of this MIB Module ........................ 3

4.3 DS3 Terminology ...................................... 3

5. Object Definitions .................................... 5

5.1 The DS3 Configuration Group .......................... 6

5.2 The DS3 Interval Group ............................... 11

5.3 The DS3 Current Group ................................ 14

5.4 The DS3 Total Group .................................. 17

6. Acknowledgments ....................................... 20

7. References ............................................ 22

8. Security Considerations................................ 23

9. Authors' Addresses..................................... 23

1. Abstract

This memo defines an experimental portion of the Management

Information Base (MIB) for use with network management protocols in

TCP/IP-based internets. In particular, this memo defines MIB objects

for representing DS3 physical interfaces. Implementors should

consult in addition to this memo the companion document that

describes that DS1 managed objects.

2. The Network Management Framework

The Internet-standard Network Management Framework consists of three

components. They are:

RFC 1155 which defines the SMI, the mechanisms used for describing

and naming objects for the purpose of management. RFC 1212

defines a more concise description mechanism, which is wholly

consistent with the SMI.

RFC 1156 which defines MIB-I, the core set of managed objects for

the Internet suite ...