Browse Prior Art Database

UPS Management Information Base (RFC1628)

IP.com Disclosure Number: IPCOM000002463D
Original Publication Date: 1994-May-01
Included in the Prior Art Database: 2000-Sep-12
Document File: 37 page(s) / 77K

Publishing Venue

Internet Society Requests For Comment (RFCs)

Related People

J. Case: AUTHOR

Abstract

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it defines objects for managing uninterruptible power supply (UPS) systems.

This text was extracted from a ASCII document.
This is the abbreviated version, containing approximately 3% of the total text.

Network Working Group J. Case, Editor

Request for Comments: 1628 SNMP Research, Incorporated

Category: Standards Track May 1994

UPS Management Information Base

Status of this Memo

This document specifies an Internet standards track protocol for the

Internet community, and requests discussion and suggestions for

improvements. Please refer to the current edition of the "Internet

Official Protocol Standards" (STD 1) for the standardization state

and status of this protocol. Distribution of this memo is unlimited.

Table of Contents

1. Introduction .............................................. 1

2. The SNMPv2 Network Management Framework ................... 2

2.1 Object Definitions ....................................... 2

3. Overview .................................................. 2

4. Definitions ............................................... 3

4.1 The Device Identification Group........................... 4

4.2 The Battery Group ........................................ 5

4.3 The Input Group .......................................... 7

4.4 The Output Group ......................................... 9

4.5 The Bypass Group ......................................... 12

4.6 The Alarm Group .......................................... 13

4.7 The Test Group ........................................... 19

4.8 The Control Group ........................................ 23

4.9 The Configuration Group .................................. 26

5. Acknowledgements .......................................... 43

6. References ................................................ 44

7. Security Considerations ................................... 45

8. Author's Address .......................................... 45

1. Introduction

This memo defines a portion of the Management Information Base (MIB)

for use with network management protocols in the Internet community.

In particular, it defines objects for managing uninterruptible power

supply (UPS) systems.

2. The SNMPv2 Network Management Framework

The SNMPv2 Network Management Framework consists of four major

components. They are:

o RFC 1442 which defines the SMI, the mechanisms used for

describing and naming objects for the purpose of management.

o STD 17, RFC 1213 defines MIB-II, the core set of managed

objects for the Internet suite of protocols.

o RFC 1445 which defines the administrative and other

architectural aspects of the framewor...