Browse Prior Art Database

Dial Control Management Information Base using SMIv2 (RFC2128)

IP.com Disclosure Number: IPCOM000002682D
Original Publication Date: 1997-Mar-01
Included in the Prior Art Database: 2000-Sep-13
Document File: 29 page(s) / 61K

Publishing Venue

Internet Society Requests For Comment (RFCs)

Related People

G. Roeck: AUTHOR

Abstract

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects used for managing demand access circuits, including ISDN.

This text was extracted from a ASCII document.
This is the abbreviated version, containing approximately 4% of the total text.

Network Working Group G. Roeck, Editor

Request for Comments: 2128 cisco Systems

Category: Standards Track March 1997

Dial Control Management Information Base using SMIv2

Status of this Memo

This document specifies an Internet standards track protocol for the

Internet community, and requests discussion and suggestions for

improvements. Please refer to the current edition of the "Internet

Official Protocol Standards" (STD 1) for the standardization state

and status of this protocol. Distribution of this memo is unlimited.

Abstract

This memo defines a portion of the Management Information Base (MIB)

for use with network management protocols in the Internet community.

In particular, it describes managed objects used for managing demand

access circuits, including ISDN.

This document specifies a MIB module in a manner that is compliant to

the SNMPv2 SMI. The set of objects is consistent with the SNMP

framework and existing SNMP standards.

This document is a product of the ISDN MIB working group within the

Internet Engineering Task Force. Comments are solicited and should

be addressed to the working group's mailing list at isdn-

mib@cisco.com and/or the author.

Table of Contents

1 The SNMPv2 Network Management Framework ...................... 2

1.1 Object Definitions ......................................... 2

2 Overview ..................................................... 2

2.1 Structure of MIB ........................................... 2

2.2 Relationship to the Interfaces MIB ......................... 3

2.2.1 Layering Model and Virtual Circuits ...................... 3

2.2.2 ifTestTable .............................................. 4

2.2.3 ifRcvAddressTable ........................................ 4

2.2.3.1 ifEntry for a single peer .............................. 5

2.3 Multilink and backup line support .......................... 5

2.4 Support for generic peers .................................. 5

3 Definitions .................................................. 6

3.1 Dial Control MIB ........................................... 6

4 Acknowledgments .............................................. 32

5 References ................................................... 33

6 Security Considerations ...................................... 33

7 Author's Address ............................................. 34

1. The SNMPv2 Network Management Framework

The SNMPv2 Network Management Framework presently consists of three

...