Browse Prior Art Database

Definitions of Managed Objects for the DS0 and DS0 Bundle Interface Type (RFC2494)

IP.com Disclosure Number: IPCOM000003075D
Original Publication Date: 1999-Jan-01
Included in the Prior Art Database: 2000-Sep-13
Document File: 21 page(s) / 44K

Publishing Venue

Internet Society Requests For Comment (RFCs)

Related People

D. Fowler: AUTHOR [+2]

Abstract

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes objects used for managing DS0 and DS0 Bundle interfaces. This document is a companion document with Definitions of Managed Objects for the DS1/E1/DS2/E2 (RFC 2495 [17]), DS3/E3 (RFC 2496 [18]), and the work in progress, SONET/SDH Interface Types.

This text was extracted from a ASCII Text document.
This is the abbreviated version, containing approximately 7% of the total text.

Network Working Group D. Fowler, Editor

Request for Comments: 2494 Newbridge Networks

Category: Standards Track January 1999

Definitions of Managed Objects

for the DS0 and DS0 Bundle Interface Type

Status of this Memo

This document specifies an Internet standards track protocol for the

Internet community, and requests discussion and suggestions for

improvements. Please refer to the current edition of the "Internet

Official Protocol Standards" (STD 1) for the standardization state

and status of this protocol. Distribution of this memo is unlimited.

Copyright Notice

Copyright (C) The Internet Society (1999). All Rights Reserved.

Abstract

This memo defines a portion of the Management Information Base (MIB)

for use with network management protocols in the Internet community.

In particular, it describes objects used for managing DS0 and DS0

Bundle interfaces. This document is a companion document with

Definitions of Managed Objects for the DS1/E1/DS2/E2 (RFC 2495 [17]),

DS3/E3 (RFC 2496 [18]), and the work in progress, SONET/SDH Interface

Types.

This memo specifies a MIB module in a manner that is both compliant

to the SNMPv2 SMI, and semantically identical to the peer SNMPv1

definitions.

Table of Contents

1 The SNMP Management Framework ................................ 2

2 Overview ..................................................... 3

2.1 BONDing Terminology ........................................ 3

2.2 Use of ifTable for DS0 Layer ............................... 3

2.3 Using ifStackTable ......................................... 4

2.3.1 Usage of Channelization for DS3, DS1, DS0 ................ 6

2.3.2 Usage of ifIndex Mapping for DS0Bundle ................... 7

3 Overview of the MIB .......................................... 7

3.1 DS0 MIB .................................................... 8

3.2 DS0Bundle MIB .............................................. 8

4 Object Definitions for DS0 ................................... 8

4.1 The DS0 Config Group ....................................... 9

4.1.1 The DS0 Configuration Table .............................. 9

4.1.2 The DS0 Channel Mapping Table ............................ 12

5 Object Definitions for DS0 Bundle ............................ 15

5.1 The DS0 Bundle Config Group ................................ 15

5.1.1 The DS0 Bundle Table ..................................... 15

5.2 The DS0 Bonding Group ...................................... 18

5.2.1 The DS0 Bonding Table .................................... 18

6 Intellectual Property ........................................ 21

7 Acknowledgments .............................................. 22

8 References ................................................... 22

9 Security Considerations .....................