Browse Prior Art Database

Internet Printing Protocol (IPP): Job and Printer Set Operations (RFC3380)

IP.com Disclosure Number: IPCOM000009960D
Original Publication Date: 2002-Sep-01
Included in the Prior Art Database: 2002-Oct-02

Publishing Venue

Internet Society Requests For Comment (RFCs)

Related People

T. Hastings: AUTHOR [+4]

Abstract

This document is an OPTIONAL extension to the Internet Printing Protocol (IPP/1.0 and IPP/1.1). This document specifies 3 additional OPTIONAL operations for use with the Internet Printing Protocol/1.0 (IPP) and IPP/1.1. The end user, operator, and administrator Set- Job-Attributes and Set-Printer-Attributes operations are used to modify IPP Job objects and Printer objects, respectively. The Get- Printer-Supported-Values administrative operation returns values that the IPP Printer will accept for setting its "xxx-supported" attributes.

This text was extracted from an ASCII text file.
This is the abbreviated version, containing approximately 2% of the total text.

Network Working Group� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � T. Hastings

Request for Comments: 3380� � � � � � � � � � � � � � � � � � � � � � � � � � � � Xerox Corporation

Updates: 2910, 2911� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � R. Herriot

Category: Standards Track� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � Consultant

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � C. Kugler

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � H. Lewis

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � IBM Corporation

� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � September 2002

� � � � � � � � � � � � � � � � � � Internet Printing Protocol (IPP):

� � � � � � � � � � � � � � � � � � � � Job and Printer Set Operations

Status of this Memo

� � This document specifies an Internet standards track protocol for the

� � Internet community, and requests discussion and suggestions for

� � improvements.� Please refer to the current edition of the "Internet

� � Official Protocol Standards" (STD 1) for the standardization state

� � and status of this protocol.� Distribution of this memo is unlimited.

Copyright Notice

� � Copyright (C) The Internet Society (2002).� All Rights Reserved.

Abstract

� � This document is an OPTIONAL extension to the Internet Printing

� � Protocol (IPP/1.0 and IPP/1.1).� This document specifies 3 additional

� � OPTIONAL operations for use with the Internet Printing Protocol/1.0

� � (IPP) and IPP/1.1.� The end user, operator, and administrator Set-

� � Job-Attributes and Set-Printer-Attributes operations are used to

� � modify IPP Job objects and Printer objects, respectively.� The Get-

� � Printer-Supported-Values administrative operation returns values that

� � the IPP Printer will accept for setting its "xxx-supported"

� � attributes.

Hastings, et. al.� � � � � � � � � � Standards Track� � � � � � � � � � � � � � � � � � � � [Page 1]

RFC 3380� � � � � � � � � IPP: Job and Printer Set Operations� � � � September 2002

Table of Contents

� � 1 Introduction......................................................4

� � 2 Terminology.......................................................5

� � 2.1 Conformance Terminology.........................................5

� � 2.2 Other terminology...............................................5

� � 3 Requirements and Use Cases........................................5

� � 4 Definition of the Set operations..................................6

� � 4.1 Set-Printer-Attributes Operation................................7

� � 4.1.1 Settable and READ-ONLY Printer Description attributes.........9

� � 4.1.2 Set-Printer-Attributes Request...........