Browse Prior Art Database

ATM-Based xDSL Bonded Interfaces MIB (RFC6768)

IP.com Disclosure Number: IPCOM000225691D
Publication Date: 2013-Feb-26
Document File: 68 page(s) / 65K

Publishing Venue

The IP.com Prior Art Database

Related People

E. Beili: AUTHOR

Abstract

ATM-Based Multi-Pair Bonding, a.k.a. G.Bond/ATM, is specified in ITU-T Recommendation G.998.1 [G.998.1], which defines a method for bonding (or aggregating) multiple xDSL lines (or individual bearer channels in multiple xDSL lines) into a single bidirectional logical link carrying an ATM stream.

This text was extracted from an ASCII text file.
This is the abbreviated version, containing approximately 4% of the total text.

Internet Engineering Task Force (IETF)                          E. Beili Request for Comments: 6768                              Actelis Networks Category: Standards Track                                  February 2013 ISSN: 2070-1721

                   ATM-Based xDSL Bonded Interfaces MIB

Abstract

   This document defines a Management Information Base (MIB) module for    use with network management protocols in TCP/IP-based internets.    This document proposes an extension to the GBOND-MIB module with a    set of objects for managing ATM-based multi-pair bonded xDSL    interfaces, as defined in ITU-T Recommendation G.998.1.

Status of This Memo

   This is an Internet Standards Track document.

   This document is a product of the Internet Engineering Task Force    (IETF).  It represents the consensus of the IETF community.  It has    received public review and has been approved for publication by the    Internet Engineering Steering Group (IESG).  Further information on    Internet Standards is available in Section 2 of RFC 5741.

   Information about the current status of this document, any errata,    and how to provide feedback on it may be obtained at    http://www.rfc-editor.org/info/rfc6768.

Copyright Notice

   Copyright (c) 2013 IETF Trust and the persons identified as the    document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal    Provisions Relating to IETF Documents    (http://trustee.ietf.org/license-info) in effect on the date of    publication of this document.  Please review these documents    carefully, as they describe your rights and restrictions with respect    to this document.  Code Components extracted from this document must    include Simplified BSD License text as described in Section 4.e of    the Trust Legal Provisions and are provided without warranty as    described in the Simplified BSD License.

Beili                        Standards Track                    [Page 1]
 RFC 6768                     G.Bond/ATM MIB                February 2013

 Table of Contents

   1. Introduction ....................................................2

   2. The Internet-Standard Management Framework ......................3

   3. The Broadband Forum Management Framework for xDSL Bonding .......3

   4. Relationship to Other MIB Modules ...............................3

      4.1. Relationship to Interfaces Group MIB Module ................3

      4.2. Relationship to G.Bond MIB Module ..........................3

      4.3. Relationship to ATM MIB Module .............................4

   5. MIB Structure ...................................................4

      5.1. Overview ....................................