Browse Prior Art Database

GMPLS RSVP-TE Extensions for Ethernet Operations, Administration, and Maintenance (OAM) Configuration (RFC7369)

IP.com Disclosure Number: IPCOM000239156D
Original Publication Date: 2014-Oct-01
Included in the Prior Art Database: 2014-Oct-17
Document File: 36 page(s) / 39K

Publishing Venue

Internet Society Requests For Comment (RFCs)

Related People

A. Takacs: AUTHOR [+3]

Abstract

Provider Backbone Bridging - Traffic Engineering (PBB-TE) [IEEE.802.1Q-2011] decouples the Ethernet data and control planes and allows external control and management mechanisms to create explicitly routed Ethernet connections. In addition, PBB-TE defines mechanisms for protection switching of bidirectional Ethernet connections. Ethernet Connectivity Fault Management (CFM) defines an adjunct connectivity-monitoring OAM flow to check the liveliness of Ethernet networks [IEEE.802.1Q-2011], including the monitoring of specific explicitly routed Ethernet connections. The ITU-T Recommendation Y.1731 [ITU-T.G.8013-2013] extended CFM and specified additional OAM functionality.

This text was extracted from an ASCII text file.
This is the abbreviated version, containing approximately 7% of the total text.

Internet Engineering Task Force (IETF)                         A. Takacs Request for Comments: 7369                                       B. Gero Category: Standards Track                                       Ericsson ISSN: 2070-1721                                                  H. Long                                                                   Huawei                                                             October 2014

                  GMPLS RSVP-TE Extensions for Ethernet     Operations, Administration, and Maintenance (OAM) Configuration

Abstract

   The work related to GMPLS Ethernet Label Switching (GELS) extended    GMPLS RSVP-TE to support the establishment of Ethernet Label    Switching Paths (LSPs).  IEEE Ethernet Connectivity Fault Management    (CFM) specifies an adjunct Operations, Administration, and    Maintenance (OAM) flow to check connectivity in Ethernet networks.    CFM can also be used with Ethernet LSPs for fault detection and    triggering recovery mechanisms.  The ITU-T Y.1731 specification    builds on CFM and specifies additional OAM mechanisms, including    Performance Monitoring, for Ethernet networks.  This document    specifies extensions of the GMPLS RSVP-TE protocol to support the    setup of the associated Ethernet OAM entities of Ethernet LSPs and    defines the Ethernet technology-specific TLVs based on the GMPLS OAM    Configuration Framework.  This document supports, but does not    modify, the IEEE and ITU-T OAM mechanisms.

Status of This Memo

   This is an Internet Standards Track document.

   This document is a product of the Internet Engineering Task Force    (IETF).  It represents the consensus of the IETF community.  It has    received public review and has been approved for publication by the    Internet Engineering Steering Group (IESG).  Further information on    Internet Standards is available in Section 2 of RFC 5741.

   Information about the current status of this document, any errata,    and how to provide feedback on it may be obtained at    http://www.rfc-editor.org/info/rfc7369.

 Takacs, et al.               Standards Track                    [Page 1]
 RFC 7369         GMPLS-Based Ethernet OAM Configuration     October 2014

 Copyright Notice

   Copyright (c) 2014 IETF Trust and the persons identified as the    document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal    Provisions Relating to IETF Documents    (http://trustee.ietf.org/license-info) in effect on the date of    publication of this document. ...