Browse Prior Art Database

MIB Transfer from the IETF to the IEEE 802.3 WG (RFC7448)

IP.com Disclosure Number: IPCOM000240635D
Publication Date: 2015-Feb-13
Document File: 14 page(s) / 13K

Publishing Venue

The IP.com Prior Art Database

Related People

T. Taylor: AUTHOR [+3]

Abstract

[RFC4663], published in September 2006, described a plan for transferring responsibility for four MIB modules related to bridges from the IETF to IEEE 802.1. Some years later, responsibility for eight more MIB modules was transferred from the IETF Ethernet Interfaces and Hub MIB (hubmib) WG to the IEEE 802.3 WG. The MIB modules concerned are tabulated below (Section 2). [RFC4663] clearly enunciates the motivation for both transfers and also provides an introduction to IEEE standardization procedures. The discussions of those topics will not be repeated here.

This text was extracted from an ASCII text file.
This is the abbreviated version, containing approximately 22% of the total text.

Internet Engineering Task Force (IETF)                    T. Taylor, Ed. Request for Comments: 7448                          PT Taylor Consulting Category: Informational                                     D. Romascanu ISSN: 2070-1721                                                    Avaya                                                            February 2015

             MIB Transfer from the IETF to the IEEE 802.3 WG

Abstract

   This document records the transfer of responsibility for the    Ethernet-related MIB modules DOT3-OAM-MIB, SNMP-REPEATER-MIB,    POWER-ETHERNET-MIB, DOT3-EPON-MIB, EtherLike-MIB, EFM-CU-MIB,    ETHER-WIS, and MAU-MIB from the IETF to the IEEE 802.3 Working Group    (WG).  This document also describes the procedures associated with    the transfer in a similar way to how RFC 4663 records the transfer of    the IETF Bridge MIB work to the IEEE 802.1 WG.

Status of This Memo

   This document is not an Internet Standards Track specification; it is    published for informational purposes.

   This document is a product of the Internet Engineering Task Force    (IETF).  It represents the consensus of the IETF community.  It has    received public review and has been approved for publication by the    Internet Engineering Steering Group (IESG).  Not all documents    approved by the IESG are a candidate for any level of Internet    Standard; see Section 2 of RFC 5741.

   Information about the current status of this document, any errata,    and how to provide feedback on it may be obtained at    http://www.rfc-editor.org/info/rfc7448.

Taylor & Romascanu            Informational                     [Page 1]
 RFC 7448         Transferring MIB Modules to IEEE 802.3    February 2015

 Copyright Notice

   Copyright (c) 2015 IETF Trust and the persons identified as the    document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal    Provisions Relating to IETF Documents    (http://trustee.ietf.org/license-info) in effect on the date of    publication of this document.  Please review these documents    carefully, as they describe your rights and restrictions with respect    to this document.  Code Components extracted from this document must    include Simplified BSD License text as described in Section 4.e of    the Trust Legal Provisions and are provided without warranty as    described in the Simplified BSD License.

Table of Contents

   1. Introduction ....................................................2    2. IETF and Corresponding IEEE 802.3 MIB Modules ...................3    3. Procedural Aspects of the Transfer ..............................4...