Browse Prior Art Database

Definitions of Managed Objects for Network Address Translators (NATs) (RFC7659)

IP.com Disclosure Number: IPCOM000245000D
Original Publication Date: 2015-Oct-01
Included in the Prior Art Database: 2016-Feb-05

Publishing Venue

Internet Society Requests For Comment (RFCs)

Related People

S. Perreault: AUTHOR [+4]

Abstract

This memo defines a portion of the Management Information Base (MIB) for devices implementing NAT functions. This MIB module, NATV2-MIB, may be used for the monitoring of such devices. NATV2-MIB supersedes NAT-MIB [RFC4008], which did not fit well with existing NAT implementations, and hence was not itself much implemented. [RFC7658] provides a detailed analysis of the deficiencies of NAT-MIB.

This text was extracted from an ASCII text file.
This is the abbreviated version, containing approximately 1% of the total text.

Internet Engineering Task Force (IETF)                      S. Perreault Request for Comments: 7659                           Jive Communications Category: Standards Track                                        T. Tsou ISSN: 2070-1721                                      Huawei Technologies                                                             S. Sivakumar                                                            Cisco Systems                                                                T. Taylor                                                     PT Taylor Consulting                                                             October 2015

  Definitions of Managed Objects for Network Address Translators (NATs)

Abstract

   This memo defines a portion of the Management Information Base (MIB)    for devices implementing the Network Address Translator (NAT)    function.  The new MIB module defined in this document, NATV2-MIB, is    intended to replace module NAT-MIB (RFC 4008).  NATV2-MIB is not    backwards compatible with NAT-MIB, for reasons given in the text of    this document.  A companion document deprecates all objects in NAT-    MIB.  NATV2-MIB can be used for the monitoring of NAT instances on a    device capable of NAT function.  Compliance levels are defined for    three application scenarios: basic NAT, pooled NAT, and    carrier-grade NAT (CGN).

Status of This Memo

   This is an Internet Standards Track document.

   This document is a product of the Internet Engineering Task Force    (IETF).  It represents the consensus of the IETF community.  It has    received public review and has been approved for publication by the    Internet Engineering Steering Group (IESG).  Further information on    Internet Standards is available in Section 2 of RFC 5741.

   Information about the current status of this document, any errata,    and how to provide feedback on it may be obtained at    http://www.rfc-editor.org/info/rfc7659.

 Perreault, et al.            Standards Track                    [Page 1]
 RFC 7659                         NAT MIB                    October 2015

 Copyright Notice

   Copyright (c) 2015 IETF Trust and the persons identified as the    document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal    Provisions Relating to IETF Documents    (http://trustee.ietf.org/license-info) in effect on the date of    publ...