Flamenco® Summit Magenta M80H
Publication Date: 2017-Mar-13
The IP.com Prior Art Database
Flamenco® Summit Magenta M80H is an effect pigment composed of titanium dioxide and silica coated on a natural mica substrate. This pigment delivers a chromatic, bright magenta interference color. The average particle size of 19 µm results in a lustrous appearance of the pigment and a high coverage in application. The pigment is ideal in applications where high chromaticity and lightness is desired. This product, and others that may be developed in the future, typically consist of combinations of titanium dioxide and silica coated onto platelets of mica or borosilicate in various ratios. They could potentially be used in a broad range of cosmetic applications, including color cosmetics and personal care. Attached are a number of formulations demonstrating the use of Flamenco® Summit Magenta M80H. These examples are not meant to be limiting in any way, and one skilled in the art will readily find many other applications and combinations of cosmetic ingredients, colorants, and the above disclosed pigment.
Luviset® Shape ⁴ Polyacrylate-22 20.00
Propylene Glycol 2.00
Preservatives W/S q.s.
DI Water 17.65
Permethyl 99A (q.s to 100%) ⁵ Isododecane 25.00
Flamenco® Summit Magenta ⁴ Mica (and) Titanium Dioxide (and) Silica 6.00
BENTONE GEL ISD V ⁶ Isododecane (and) Disteardimonium Hectorite (and) 6.00
PMMA S ⁷ Polymethyl Methacrylate 5.00
Preservatives O/S q.s.
Uvinul® A Plus B* ⁴ Ethylhexyl Methoxycinnamate (and) 0.10
Diethylamino Hydroxybenzoyl Hexyl Benzoate
DOW CORNING SW-8005 C30 RESIN WAX ¹ C30-45 Alkyldimethylsilyl Polypropylsilsesquioxane 2.00
JEECHEM CTG ³ Caprylic/Capric Triglyceride 3.00
Trade Name INCI Name % Function
DOW CORNING TORAY FZ-3196 ¹ Caprylyl Methicone 4.00
Vitamin E Acetate Care ⁴ Tocopheryl Acetate 0.25
DOW CORNING 5200 FORMULATION AID ¹ Lauryl PEG/PPG-18/18 Methicone 6.00
No. 1 Yellow Carnauba Wax ² Copernicia Cerifera (Carnauba) Wax 3.00
I. In main vessel heat Phase A ingredients to 60°C with continuous mixing.
II. In a side vessel premix Phase B into Phase A maintaining temperature to 60°C.
III. In a side vessel premix Phase C and heat to 50°C. Add to Phase AB under homogenization.
IV. Sweep mix and reduce heat to 50°C. Add Phase D into Phase ABC
V. Package into appropriate containers
Suppliers and Trademark Owners
1. Dow Corning Corporation 5. Presperse LLC
2. Frank B. Ross Company, Inc. 6. Elementis Specialties
3. Jeen International Corporation 7. Brenntag Specialties Inc.
* Uvinul® A Plus B is not an approved Sunscreen active in the USA & Canada.
** When Carbon Black pigments are used, they should first be dispersed in Isododecane and
BENTONE Gel ISD V this mixture should then be milled in either a colloid or roller mill.
For more information contact your BASF Sales Representative or visit us at www.innovadex.com
The SPF values contained herein are estimates produced by BASF’s Sunscreen Simulator, a BASF proprietary tool used to estimate a
formulation’s Sunburn Protection Factor (SPF), or are otherwise produced through BASF proprietary methods. The output from this tool or
method is not intended, nor does it replace, in vivo and/or in vitro SPF testing of any product, including sunscreen drug products intended for
over-the-counter (OTC) human use. The SPF values contained herein shall not be relied upon to support any product claim, or to comply
with any requirement of the US Food and Drug Administration (US FDA), including its label or effectiveness testing requirements for OTC
sunscreen products, without BASF's written consent. BASF specifically disclaims express or implied warranties for any such intended use.
WHILE THE DESCRIPTIONS, DESIGNS, DATA AND INFORMATION CONTAINED HEREIN ARE PRESENTED IN GOOD
FAITH AND BELIEVED TO BE ACCURATE, THEY ARE PROVIDED FOR GUIDANCE ONLY. BECAUSE MANY FACTORS
MAY AFFECT PROCESSING OR APPLICATION/USE, BASF RECOMMENDS THAT THE READER MAKE TESTS TO