Dismiss
The IQ application will be briefly unavailable on Sunday, March 31st, starting at 10:00am ET. Access will be restored as quickly as possible.
Browse Prior Art Database

Definitions of Managed Objects for Frame Relay Service (RFC1604)

IP.com Disclosure Number: IPCOM000002439D
Original Publication Date: 1994-Mar-01
Included in the Prior Art Database: 2019-Feb-13
Document File: 46 page(s) / 47K

Publishing Venue

Internet Society Requests For Comment (RFCs)

Related People

T. Brown: AUTHOR

Related Documents

10.17487/RFC1604: DOI

Abstract

This memo defines an extension to the Management Information Base (MIB) for use with network management protocols in TCP/IP-based internets. In particular, it defines objects for managing the Frame Relay Service. [STANDARDS-TRACK]

This text was extracted from a PDF file.
This is the abbreviated version, containing approximately 5% of the total text.

Network Working Group T. Brown, Editor Request for Comments: 1604 Bell Communications Research Obsoletes: 1596 March 1994 Category: Standards Track

Definitions of Managed Objects for Frame Relay Service

Status of this Memo

This document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "Internet Official Protocol Standards" (STD 1) for the standardization state and status of this protocol. Distribution of this memo is unlimited.

Abstract

This memo defines an extension to the Management Information Base (MIB) for use with network management protocols in TCP/IP-based internets. In particular, it defines objects for managing the Frame Relay Service.

Table of Contents

1. The SNMPv2 Network Management Framework ............... 2 2. Object Definitions .................................... 2 3. Overview .............................................. 2 3.1 Scope of MIB ......................................... 3 3.2 Frame Relay Service MIB Terminology .................. 5 3.3 Apply MIB II to a Frame Relay Service ................ 7 4. Object Definitions .................................... 12 4.1 The Frame Relay Service Logical Port Group ........... 12 4.2 The Frame Relay Management VC Signaling Group ........ 15 4.3 The PVC End-Point Group .............................. 22 4.4 Frame Relay PVC Connection Group ..................... 30 4.5 Frame Relay Accounting Groups ........................ 37 5. Frame Relay Network Service TRAPS ..................... 40 6. Conformance Information ............................... 43 7. Acknowledgments ....................................... 45 8. References ............................................ 45 9. Security Considerations ............................... 46 10. Author’s Address ..................................... 46

Frame Relay Service MIB Working Group [Page 1]

RFC 1604 Frame Relay Service MIB March 1994

1. The SNMPv2 Network Management Framework

The SNMPv2 Network Management Framework consists of four major components. They are:

o RFC 1442 which defines the SMI, the mechanisms used for describing and naming objects for the purpose of management.

o STD 17, RFC 1213 defines MIB-II, the core set of managed objects for the Internet suite of protocols.

o RFC 1445 which defines the administrative and other architectural aspects of the framework.

o RFC 1448 which defines the protocol used for network access to managed objects.

The Framework permits new objects to be defined for the purpose of experimentation and evaluation.

2. Object Definitions

Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. Objects in the MIB are defined using the subset of Abstract Syntax Notation One (ASN.1) defined in the SMI. In particular, each object object type is named by an OBJECT IDENTIFIER, an administratively assigned name. The object type togethe...

Processing...
Loading...