Dismiss
The IQ application will be briefly unavailable on Sunday, March 31st, starting at 10:00am ET. Access will be restored as quickly as possible.
Browse Prior Art Database

Definitions of Managed Objects for ATM Management Version 8.0 using SMIv2 (RFC1695)

IP.com Disclosure Number: IPCOM000002533D
Original Publication Date: 1994-Aug-01
Included in the Prior Art Database: 2019-Feb-12
Document File: 73 page(s) / 79K

Publishing Venue

Internet Society Requests For Comment (RFCs)

Related People

M. Ahmed: AUTHOR [+1]

Related Documents

10.17487/RFC1695: DOI

Abstract

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes objects used for managing ATM-based interfaces, devices, networks and services. [STANDARDS-TRACK]

This text was extracted from a PDF file.
This is the abbreviated version, containing approximately 3% of the total text.

Network Working Group M. Ahmed Request for Comments: 1695 K. Tesink Category: Standards Track Editors Bell Communications Research August 1994

Definitions of Managed Objects for ATM Management Version 8.0 using SMIv2

Status of this Memo

This document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "Internet Official Protocol Standards" (STD 1) for the standardization state and status of this protocol. Distribution of this memo is unlimited.

Table of Contents

1. Introduction ............................................. 2 2. The SNMPv2 Network Management Framework .................. 2 3. Object Definitions ....................................... 2 4. ATM Terminology .......................................... 3 4.1 VCL/VPL and VCC/VPC ..................................... 3 4.2 PVC and SVC ............................................. 5 4.3 Traffic Management Parameters ........................... 5 4.3.1 Traffic Policing and Traffic Shaping Parameters ...... 5 4.3.2 Cell Loss Priority .................................... 6 4.3.3 QoS Class ............................................. 6 5. Overview ................................................. 7 5.1 Background .............................................. 7 5.2 Structure of the MIB .................................... 7 5.3 ATM Interface Configuration Group ....................... 7 5.4 ATM Interface DS3 PLCP and TC Layer Groups .............. 8 5.5 ATM Virtual Link and Cross-Connect Groups ............... 8 6. Application of MIB II to ATM ............................. 8 6.1 The System Group ........................................ 8 6.2 The Interface Group ..................................... 8 6.2.1 Support of the ATM Cell Layer by ifTable .............. 9 7. Support of the AAL3/4 Based Interfaces ................... 10 8. Support of the AAL5 Managed Objects ...................... 10 8.1 Managing AAL5 in a Switch ............................... 11 8.2 Managing AAL5 in a Host ................................. 12 8.3 Support of AAL5 by ifTable .............................. 13 8.4 Support of Proprietary Virtual Interface by ifT-able .. 14 8.5 AAL5 Connection Performance Statistics Group ............ 15

Ahmed & Tesink [Page 1]

RFC 1695 ATM Management Objects August 1994

9. ILMI MIB and the ATM Managed Objects ..................... 15 10. Definitions ............................................. 18 11. Acknowledgments ......................................... 72 12. References .............................................. 72 13. Security Considerations ................................. 73 14. Authors’ Addresses ...................................... 73

1. Introduction

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes objects used for managing ATM-bas...

Processing...
Loading...