Definitions of Managed Objects for the SONET/SDH Interface Type (RFC2558)
Original Publication Date: 1999-Mar-01
Included in the Prior Art Database: 2000-Sep-13
Publishing Venue
Internet Society Requests For Comment (RFCs)
Related People
Abstract
This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in TCP/IP-based internets. In particular, it defines objects for managing Synchronous Optical Network/Synchronous Digital Hierarchy (SONET/SDH) interfaces. This document is a companion to the documents that define Managed Objects for the DS1/E1/DS2/E2 and DS3/E3 Interface Types [24][25].
Network Working Group K. Tesink
Request for Comments: 2558 Telcordia Technologies
Obsoletes: 1595 March 1999
Category: Standards Track
Definitions of Managed Objects
for the SONET/SDH Interface Type
Status of this Memo
This document specifies an Internet standards track protocol for the
Internet community, and requests discussion and suggestions for
improvements. Please refer to the current edition of the "Internet
Official Protocol Standards" (STD 1) for the standardization state
and status of this protocol. Distribution of this memo is unlimited.
Copyright Notice
Copyright (C) The Internet Society (1999). All Rights Reserved.
1. Abstract
This memo defines a portion of the Management Information Base (MIB)
for use with network management protocols in TCP/IP-based internets.
In particular, it defines objects for managing Synchronous Optical
Network/Synchronous Digital Hierarchy (SONET/SDH) interfaces. This
document is a companion to the documents that define Managed Objects
for the DS1/E1/DS2/E2 and DS3/E3 Interface Types [24][25].
Textual Conventions used in this MIB are defined in [6] and [36].
This memo replaces RFC 1595 [30]. Changes relative to RFC 1595 are
summarized in the MIB module's REVISION clause.
Table of Contents
1 Abstract .............................................. 1
2 The SNMP Network Management Framework ................. 2
3 Overview .............................................. 3
3.1 Use of the ifTable .................................. 4
3.2 Use of ifTable for SONET/SDH Medium/Section/Line
Layer ............................................... 5
3.3 Use of ifTable for SONET/SDH Paths .................. 6
3.4 Use of ifTable for SONET/SDH VTs/VCs ................ 7
3.5 SONET/SDH Terminology ............................... 8
4 Object Definitions .................................... 16
4.1 The SONET/SDH Medium Group .......................... 19
4.2 The SONET/SDH Section Group ......................... 23
4.2.1 The SONET/SDH Section Current Group ............... 23
4.2.2 The SONET/SDH Section Interval Group .............. 26
4.3 The SONET/SDH Line Group ............................ 28
4.3.1 The SONET/SDH Line Current Group .................. 28
4.3.2 The SONET/SDH Line Interval Group ................. 30
4.4 The SONET/SDH Far End Line Group .................... 32
4.4.1 The SONET/SDH Far End Line Current Group .......... 33
4.4.2 Th...