WR-02-01
Hydrogel with RonaCare™Ectoin
Ingredients Art. No. INCI
A
TIMIRON® Splendid Gold 1.17474 (1) CI 77891 (TITANIUM DIOXIDE), MICA, SILICA 0.10
Carbopol Ultrez 10 (2) CARBOMER 0.40
Water, demineralized AQUA (WATER) 67.70
B
RonaCare™ Ectoin 1.30200 (1) ECTOIN 1.00
Tris(hydroxymethyl)aminomethane 1.30132 (1) TROMETHAMINE 0.60
Germaben II (3) PROPYLENE GLYCOL, DIAZOLIDINYL 0.20
UREA, METHYLPARABEN, PROPYLPARABEN
Water, demineralized AQUA (WATER) 10.00
C
Lubrajel DV (4) PROPYLENE GLYCOL, 18.00
POLYGLYCERYLMETHACRYLATE
D
Lubrajel Oil (4) PVM/MA COPOLYMER, PROPYLENE 2.00
GLYCOL, GLYCERYL POLYMETHACRYLATE
Procedure:
Disperse the pigment in the water of phase A and add the carbomer while stirring. Stir until the
suspension is homogeneous and incorporate the predissolved phase B. Finally add phase C and D.
Notes:
pH value 25°C : 6.5
Viskosity : 60 000 mPa.s (Brookfield RVT, Spindle C, 5 rpm, Helipath) at 25°C
Suppliers:
(1) Merck KGaA/Rona®
(2) BF Goodrich GmbH
(3) ISP Global Technologies
(4) Guardian
We advise our customers on technological matters to the best of our knowledge under given circumstances. Our information and recommendations are without
obligation. Existing laws and regulations are to be observed in all cases. This also applies in respect to any rights of third parties. Our suggestions do not
relieve our customers of their responsibility of checking the suitability of our products to the envisaged purpose.
Page 1 of 1 (WR-02-01)
WR-03-01
After Shave Care with RonaCare™ Ectoin (O/W)
Ingredients Art. No. INCI
A
Eumulgin B 1 (1) CETEARETH-12 0.50
Eumulgin B 2 (1) CETEARETH-20 0.50
Cutina MD-V (1) GLYCERYL STEARATE 3.00
Cetiol LC (1) COCO-CAPRYLATE/CAPRATE 5.00
Carbopol Ultrez 10 (2) CARBOMER 0.30
B
Water, demineralized AQUA (WATER) 66.10
Glycerol (about 87%) 1.04091 (3) GLYCERIN 3.00
Ethanol 96% 1.00971 (3) ALCOHOL 20.00
Menthol, cryst. 1.05995 (3) MENTHOL 0.30
Tris(hydroxymethyl)aminomethane 1.30132 (3) TROMETHAMINE 0.30
RonaCare™ Ectoin 1.30200 (3) ECTOIN 1.00
Procedure:
Heat phase A and Phase B separately to 80°C.
Incorporate phase A into phase B while stirring.
Homogenize.
Cool down while stirring.
Notes:
pH (25°C) 7.25
Viscosity : 34 000 mPas (Brookfield RVT, spindle C, 5 rpm, Helipath) at 25°C
Suppliers:
(1) Cognis GmbH
(2) BF Goodrich GmbH
(3) Merck KGaA/Rona®
We advise our customers on technological matters to the best of our knowledge under given circumstances. Our information and recommendations are without
obligation. Existing laws and regulations are to be observed in all cases. This also applies in respect to any ri...
