Dismiss
InnovationQ will be updated on Sunday, September 22, from 10am-noon ET. You may experience brief service interruptions during that time.

Month of March 2009 - Page Number 15

Showing 141 - 150 of 915 from March 2009
Browse Prior Art Database
  1. 141.
    Described is a method of adding delay to fix hold violations by anticipating where they may occur on synchronous clock domain crossings.
    IPCOM000181059D | Original Publication Date: 2009-Mar-24
  2. 142.
    Chemical Reactions are simulated utilizing an interactive set of electronic chemware implements.
    IPCOM000181058D | Original Publication Date: 2009-Mar-24
  3. 143.
    Disclosed is a method of modeling clock mistracking and skew in logic synthesis tools.
    IPCOM000181057D | Original Publication Date: 2009-Mar-24
  4. 144.
    To solve the problem of providing electrostatic discharge (ESD) protection to Through Silicon Vias (TSVs) during chip stack assembly, a temporary metalized plate is added to the back of the bulk silicon of an integrated circuit chip as the last step of chip fabrication. This metalized plate will temporarily...
    IPCOM000181056D | Original Publication Date: 2009-Mar-24
  5. 145.
    A typical printer/copier keeps track of operating parameters, such as the number of sheets printed, and uses this to determine if power supply air filters need to be replaced. This idea proposes an improvement to the calculation used when estimating if replacement of a copier/printer’s power supply air filter is...
    IPCOM000181052D | 2009-Mar-24
  6. 146.
    When a Copier/Printer/Multifunction device (MFD) is decommissioned and disposed of, there is a need to provide for secure handling of the included disk drives. Some manufacturers provide for this by removing the hard disks from returning devices and returning them to the customer for disposal or destruction according...
    IPCOM000181051D | 2009-Mar-24
  7. 147.
    This idea suggests an improvement to a Booklet Maker, to decrease the chances that a paper jam will occur and increase the reliability of the Booklet Maker. In a typical Booklet Maker, there are usually sets of rolls used to form a crease in the booklet. This idea suggests using an O-Ring connecting some of the...
    IPCOM000181050D | 2009-Mar-24
  8. 148.
    This idea proposes the use of peel-off strips to protect the adhesive target area on perfect bound cover stock from excessive fuser oil that can interfere with binding adhesives. The strips use a low-tack adhesive (similar to note pads) for easy removal. The strips would be pre-attached or user-attached prior to...
    IPCOM000181049D | 2009-Mar-24
  9. 149.
    This proposes a computer-based system for companies with programs such as “green” and “socially conscious” initiatives to offer B2B and B2C solutions for assessing a product’s environmental impact. It is a novel application of known computer based techniques used in interactive diagnostic and training applications,...
    IPCOM000181048D | 2009-Mar-24
  10. 150.
    The present disclosure relates to a process for the preparation of pure pravastatin sodium.
    IPCOM000181047D | 2009-Mar-24